Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

Garmin Vector 3 Dual-Sensing Power Meter
$999.99
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Time Xpro 15
$500.00
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
Garmin Vector 3S Upgrade Pedal
$499.99
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Crank Brothers Candy 11 Pedals
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers Eggbeater 11
$450.00
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
Crank Brothers Mallet Enduro 11
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Speedplay Zero Pavé Stainless
$339.99
The Zero Pavé is Speedplay’s minimalist, race-tuned design built specifically to handle the harsh and unpredictable conditions of the legendary European cobbled classics. Based on Speedplay’s popular Zero pedal technology, Pavé pedals shave non-essential material to ensure entry and release in wet and dirty environments. Originally developed for Speedplay’s professional cycling teams, Zero Pavé pedals have been thoroughly tested and proven over the years with numerous victories in the world’s toughest races including Paris-Roubaix, Tour of Flanders, Gent Wevelgem and Strade Bianche. - Symmetrical two-sided pedals self-locate just by stepping down into the cleat - Choose between micro-adjustable float or a fixed position - Fits any shoe with a 3- or 4-hole mount - The Zero Pavé’s locking mechanism does not rely on spring tension for security, so entering and exiting Zero Pavé pedals is easy, but unintended release is virtually impossible
Time ATAC XC 12
$300.00
The ATAC XC 12 is the pedal of choice for Time's elite cyclocross and mountain bike riders. At 124 grams it's their lightest off-road pedal featuring a titanium axle and carbon body. Like the XC 6 and XC 8, it offers a tension adjustment and as with all ATAC pedals, XC 12 offers easy and consistent engagement and an open design that clears debris each time you step in.
Time Xpro 12
$300.00
The XPro 12 is perfect for elite riders. With a carbon body and titanium axle the XPro 12 is light and durable at the same time. Clipping in is easy with the automatic pre-opening ICLIC System. The carbon blade is adjustable in 3 positions to customize engagement tension and the stack height is low, keeping the cyclist's sole as close to the center of the pedal axle as possible. This, along with the large pedal surface area results in incomparable pedaling efficiency and comfort.
Time Speciale
$295.00
Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.
Speedplay Zero Aero Stainless
$245.00
As its name suggests, Speedplay’s Zero Aero Pedal System is designed to increase speed by slashing wind resistance. With a tiny frontal area, a dimpled surface, and a streamlined profile, the Zero Aero is the ultimate aerodynamic pedal system. Every aspect of its design has been painstakingly tailored to boost speed by minimizing wind drag. Developed specifically for time trials and triathlons where every second counts, the Zero Aero Pedal System provides more speed with the same power – that's why they call it free speed! - Float: 0 - 15 degrees, unrestricted free float - Release Angle: Microadjustable heel-out - Mounting: All 3- and 4-hole shoes; no fit kit required *Includes Zero Aero Walkable Cleats with special Aero Base Plate Surrounds. *Note: Zero Aero pedals are not compatible with Speedplay Ultra Light Action and X-Series cleats. Zero Aero cleats are not compatible with Ultra Light Action and X-Series pedals.
HT Pedals T1T Pedals
$235.00
HT's T1T Pedals boast a titanium spindle for light weight. The 16.8mm low profile and 68x83.5mm base platform allow for increased stability on aggressive terrains. T1 features HT's unique proprietary clipless system with its adjustable dual tension settings for secure foot-holding under any condition. - Titanium spindle - Platform: 68 x 83.5 x 16.8mm - Extruded CNC-optimized aluminum for strength to weight ratio - EVO bearings system (needle bearings) and 1 DU bushing per side - 2 adjustable pins per side for additional traction - HT exclusive X1 or X1F cleats - 4 deg (X1), 8 deg (X1F) float and 13 deg release angle
Speedplay Zero Stainless
$210.00
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
Speedplay Light Action Stainless
$200.00
Speedplay's Light Action Stainless pedals are the easiest Speedplays to get into, so they're the perfect solution for seasoned cyclists with delicate knees, and first-time clipless-pedal users alike. They provide 15-degrees of knee-saving float without the self-centering action inherent in most pedals, so you don't work against spring tension. Their compact and low-profile design positions your feet closer to the axles for maximum power transmission and excellent cornering clearance. They boast durable stainless-steel axles with needle and two cartridge bearings for smooth spinning and feature dual-sided entry and early release for super easy starts and stops.
Speedplay Zero Stainless
$199.99
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard.
Xpedo Baldwin Ti Pedals
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
HT Pedals T1-SX BMX-SX Pedals
$175.00
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
Time Xpro 10
$175.00
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
Crank Brothers Candy 7 Pedals
$169.00
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
Crank Brothers Mallet DH
$169.00
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
Crank Brothers Mallet E LS
$169.00
The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless
Crank Brothers Mallet E LS
$169.00
Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Crank Brothers Mallet E Pedals
$169.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
HT Pedals X2 DH Race Pedals
$169.00
To create its new X2 DH clipless pedals, HT Components started with the effective design of its X1 downhill pedals. The X1's platform was altered to make the X2's easier to get in and out of with a wider variety of shoes. The X2 uses a thinner, 14mm platform than the X1's to allow them to be more responsive, and it uses a slimmer cage design on the CNC-machined body. - Platform:85 X 94 X 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
HT Pedals X2-SX BMX Pedals
$169.00
HT X2-SX BMX pedals have stiffer springs and improved bolts and plates compared to the standard X2. The X2 uses a thinner 14mm platform and a slimmer cage design on the cnc-machined body. - Platform: 85 x 94 x 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
45NRTH Helva
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
Crank Brothers Stamp 7 Pedals
$150.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Time Speciale 8
$150.00
Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.
SDG Jr. Pro Kit
$149.99
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
Page 1 of 4 Next page