Parts & Accessories

Replacement Surly Bicycle Mounted Rack Parts - Direct replacement item for Surly racks - Replacement upper tubes, made from Stainless steel

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

Jandd's Rack Bungee is made with flat braided elastic for better load control. - Each strap is made up of 2 lengths of bungee so that the load is held front and back with 1 strap

Extend the life of your Dummy bags with this replaceable wear patch.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Ensure your cargo arrives at your destination with Electra's Rack Strap. This convenient cord is made from double strips of elastic and is the perfect way to secure awkward loads. Two end hooks attach easily most anywhere on your rear rack.

Electra's Wicker Basket Bracket Kit offers additional support to keep your Electra Wicker Basket (sold separately) securely in place, which allows you to carry even heavier items, such as books and groceries. The steel bracket attaches directly to your bike via the headset and the basket simply bolts to the bracket. You even get 2 brackets, one for standard 1-inch, and one for oversize 1 1/8-inch headsets.

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).

Accessory to attach Thule Pack ’n Pedal pannier magnet onto virtually any other bike rack. • Attach the Thule magnet to the adapter bracket (sold separately) for attachment to virtually any type of bike rack. • Versatile design allows for a variety of attachment options.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

Front Rack mid-blade adaptor kit.

Lower offset sliding plate - generally used as the lower mounting plate, regardless of the fork construction.

Replacement upper tubes for Surly rear racks. Stainless steel.

Unicrown sliding plate - a non-offset, slotted plate; generally used for the upper mounting plate on unicrown construction forks.

Upper offset sliding plate - an offset and slotted plate; generally used for the upper mounting plate on lugged construction forks.

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

Dimension Bicycle Mounted Rack Parts - Sold as a pair - For 14mm-16mm seat stays - Nuts and bolts included - Plastic coated for secure attachment to frames without braze-ons

Storage made simple Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage. Key features - Wide opening for easy access - Fits in standard water bottle cages - Securely holds tools, CO2, spare tube, tire levers and more